Flow suppress
Typical：AS-301905、AS-3607
This is a one-component epoxy adhesive which can suppress viscosity reduction when heat applying
fine adhesion, it can prevent any overflow (in or out).
| AS-301905 | Flow control function can be attached to a variety of epoxy products. |
|---|---|
| AS-3607 | Even for some tiny screen printing process, the pre-gel function can be attached to allow better flow control for precise adhesion. |
| Product | AS-301905 | AS-3607 |
|---|---|---|
| Feature | Impact resistance | Pre-gel function |
| Viscosity | 13,000mPa・s | 18,000mPa・s |
| Pre-gel condition | - | 120℃×3min |
| Curing condition | 90℃×60min | 120℃×30min |
| Tg | 95℃ | 75℃ |
| CTE | 76 / 195 ppm | 75 /200 ppm |
| Modulus | 2.6 GPa | 2.2 GPa |
| Tensile shear strength | 20 MPa | 21 MPa |
| 使用范例 | Application example | Sensor：board/cap |
If you have any questions or require development, please feel free to contact us
Reception time/9：00～17：00
